YANTAI BAICAI MACHINERY hydraulic breakers hammers korea are compatible with all kinds of excavators such as Doosan, Dawoo, Volvo, Hitachi, Kato, Kobelco, Komatsu, Sumitao, Liebheer, Hyundai, Cat, Jonyong, Changjiang, Liugong, Yucai, Case, John Deer, Fotonlovol and Loader etc. All hydraulic hammer korea, FURUKAWA HB20G Hydraulic Breaker and spare parts are serviced and supported by YANTAI BAICAI, welcome to send inquiry to us for FURUKAWA HB20G Hydraulic Breaker, hydraulic hammer korea, thank you.
FURUKAWA HB20G Hydraulic Breaker Introduce:
The power source of the hydraulic hammer is the pressure oil provided by the excavator or the pump station of the loader, which can more effectively clean the floating rock and the mud in the crack of the rock in the function of excavating the foundation of the building. The principle of selecting hydraulic breaking hammer is according to excavator type and the environment of working. Our YANTAI BAICAI furukawa hb20g hydraulic breakers are compatible with all kinds of excavators such as Doosan, Dawoo, Volvo, Hitachi, Kato, Kobelco, Komatsu, Sumitao, Liebheer, Hyundai, Cat, Jonyong, Changjiang, Liugong, Yucai, Case, John Deer, Fotonlovol and Loader etc.
Main Features of FURUKAWA HB20G Hydraulic Breaker:
Through bolts: Longer service life by to applied heat treatment.
Back head: Material: 20CrMo, impact energy is accumulated due to charged nitrogen gas in the block.
Front Head: Using 20CrMo material, high quality with long life using.
Valve: We adopt production process by grinding machine, with high precision.
Cylinder body: Material: 20CrMo, it is best quality material.
Piston: Longer service life by optimized design and high quality special steel.
Front Head: Using 20CrMo raw material, which are provided by domestic famous manufacturer, forging again and again to make internal organization more tight and increasing the hydraulic breaker wear-resistance.
Chisel: The specially heat treated chisel is directly applied to break rocks. There are four types for choosing: Moil, Blunt, Flat, Conical Point. The material is 42Crmo.
Ring Bush & Front Cover: Guiding the chisel while they are working. Using 20CrMo steel as raw materials, which are provided by domestic famous manufacturer; forging again and again to make forming, to make internal organization more tight, and increase products’ wear-resistance.
Main Body: Including Front head, cylinder and back head. Ensure your breaker will be in best performance
Seal Kit: We can supply both Parker and NOK seal kit which are most famous brand in the business line.
Our companys' control valve with good process, the edges do processing by Grinding Machine, so the control valve of hydraulic breaker with high precision.
Operating the Hydraulic Hammer：
* Press Chisel to the object to be broken.
* Strike vertically.
* Once object is broken, stop striking immediately.
Working in high or low outside temperatures：
High: The temperature of hydraulic oil must be ensure it close not exceed the specified temperature limits.
Low: At temperature below 0 degrees centigrade, the carrier must be warmed up prior to use, in the way described by the excavator manufacturer.
Ensure that the hydraulic oil in the carrier is at least at 0 degrees centigrade, before starting up the hydraulic hammer.
Note: The Hydraulic hammer and excavator or will not operate to full capacity unit the oil temperature has reached at least 60 degrees centigrade.
Always observe the relevant safety regulations when handing oils and greasing.
Every two hours of continuous operation lubricate the chisel with moly-based grease.
To guarantee longer life of chisel and bushing, hydraulic hammer should take high performance grease and genuine parts which is supplied by PTEROSAUR.
1. Engine’s rotation speed should be controlled under the one pre-set.
2. Don’t work continuously in hot summer, to prevent too high temperature of hydraulic oil. If oil temperature reaches 80 degrees centigrade, must stop working, until the temperature lowersdown.
Feeding hot hydraulic oil to extremely cold hydrauic hammer will cause internal stresses in the unit resulting in its failure.
If grease is not supplied sufficiently, then high hear is generated due to friction at the moving parts if the hammer. The heat can cause premature wear and cracking of related parts.
Maintenance of FURUKAWA HB20G Hydraulic Breaker:
Please choose No.68 hydraulic oil in winter and No.46 hydraulic oil in summer. Oil should be clean & sufficient during working. Dirty oil will cause damages to the Breaker. Please check regularly if Breaker’s cylinder, accumulator, oil pipes & hoses leak oil. If oil leaks, please replace O‐ring & oil seal in time.
Chisel, Chisel Pin & Bushing
Before each working, check if the chisel pins are in good conditions. Check regularly the clearance between bushing and chisel, too much clearance will cause piston & chisel broken. If outer diameter of chisel abrades more than 3mm, or inner diameter of bushing abrades more than 6mm, please replace new ones.
1. Are you a manufacturer? Yes, our factory was established in 2004 2. Can you produce according to customers' design? Sure, OEM / ODM service available. We are professional manufacturer for nearly 14 years. 3. What's the MOQ and payment terms? MOQ is 1 set. Payment via T/T, L/C, Western Union accepted, other terms can be negotiated. 4. How about delivery time? 3-7 working days after receiving the payment. 5. After-sale Service
12months warranty for hydraulic breakers. Detailed warranty for each spare parts of hydraulic breaker as per our warranty policy.
6. Impact Test
Every FURUKAWA HB20G Hydraulic Breaker will do impact test before shipment.
Package of FURUKAWA HB20G Hydraulic Breaker:
1. Inner package hydraulic breakers were packed in stretch film
2. Outside package with export wooden case
3. Hydraulic breaker Package can be as per customer’s request
Delivery of FURUKAWA HB20G Hydraulic Breaker:
1. Delivery time: Usually 3-7days (1-5sets) after receiving the payment 2. We can arrange hydraulic breaker shipment by ocean or air transportation according to your request from any port of China.
Yantai Baicai Machinery Co., Ltd. Was founded in 2004, we are professional manufacturer of hydraulic breakers. Now our factory mainly produces SOOSAN and FURUKAWA system hydraulic breakers and spare parts in China.
We have been specialized in R&D heavy-duty hydraulic breakers. We have already developed 210mm and 230mm diameter chisel heavy duty breakers in 2012. We also do OEM hydraulic breakers for customers, our hydraulic breakers have exported to USA, Italy, Korea, Norway, Austria, Australia, India, Indonesia, Sri Lanka, Qatar, Pakistan, Thailand, Vietnam, Peru and so on.
We focus on the quality and service, choosing material strictly, we adopted Korea advanced technology, Customers’ satisfaction is always our first priority.
We got CE certificate and ISO9001 quality management system.
We are in confidence that, together with customers, we can always create better future.
Hydraulic breaker has become an important tool for the job, it was installed in the hydraulic breaker backhoe loaders (also known as two busy) or wheel loader for crushing operations, our hydraulic breaker (hydraulic hammer) are applicable to a wide rang of weight class of excavators which from1.2 to100 ton, welcome you send inquiry to us, thank you.