The first dealership with the platform


china CASE Hydraulic Rock Hammer

company : Yantai Baicai Machinery Co., Ltd.
address : No. 1 ZHISHUIQIANJIE, ZHIFU DISTRICT, YANTAI

Contact

Description

    Our company-YANTAI Baicai Machiery Co., Ltd. supply side type, top type, silent type hydraulic rock breaker hammer and spare parts. High quality with competitive price. Below hydraulic rock breaker hammer YLB1400 is very popular model breaker, if you have any interest in our silenced type YLB1400, welcome you to inquiry for it.


Description of hydraulic rock breaker hammer:

YANTAI BAICAI Hydraulic breakers, we have three types for your choice:  Side Type,Top Open type, and Box Silenced Type.

YANTAI BAICAI Hydraulic breakers Advantages:

1. High Strength and wear resistance steel plate adopted.

2. Suitable with all brands of excavators.

3. Strong compatibility.

4. Unique valve system. SOOSAN series Hydraulic Breakers adopt simple hydraulic circuit system, which use oil less and improve efficiency more.

5. First-class quality: Korean technology used to guarantee the quality.

6.Powerful stroke. Compared with other brand's products, SOOSAN series Hydraulic Breakers has more powerful stroke and reliable performances.

The Characteristic of hydraulic Rock Breaker:

Powerful impact blow. Compared with other brand's products, Yantai Baicai hydraulic breaker has more powerful stroke and reliable performances.  

The cylinder material is better than 20CrMo,stronger durability, longer lifetime.

Simple operation and easy maintenance. 

Long warranty period.

Hydraulic Rock Breaker Hammer Working Principle:

    Hydraulic breaker hammer has become an important working tool for excavators, and some people install the hydraulic crushing hammer in the backhole loader  (also known as two busy) or wheel loaders to carry out the crushing operation. Hydraulic breaking hammer, also known as hydraulic breaker or hydraulic Stone breaker.

Hydraulic Breaker without Accumulator:

Simple structure, Low failures rate

Easy maintenance, low cost and impact energy increase. Therefore, users can reduce the cost of using and maintaining two aspects at the same time.

Hydraulic Breaker with Accumulator:

    In the case of single strike, the strength will be slightly larger, no space can be found during the installation and maintenance, otherwise the nitrogen will be leaked, which causes the crusher to strike weak and the accumulator diaphragm damaged.

The Function of Accumulator:

The accumulator is filled with nitrogen, which uses hydraulic hammer to reverse the remaining energy and piston during the previous blow.

The energy stored in the tank is stored at the same time, releasing energy at the same time during the second strike, increasing the hitting ability, usually not hitting the crusher itself.

    The accumulator is installed in the case of energy to increase the striking force of the crusher. So there are no accumulators in small hydraulic hammer, and medium and large ones are equipped with energy storage.


Accumulator




Application of Hydraulic Rock Breaker:

1.Mining: Mountains, mining, crushing, secondary crushing

2.Metallurgy, slag cleaning, ladle furnace demolition, demolition equipment foundation body dissatisfied

3.Railway, tunnel bridge, mountain down.

4.Highway: highway repair, cement pavement broken, foundation excavation.

5.Municipal gardens, concrete crushing, gas engineering construction, the transformation of the old city.

6.Building: the old building demolition, reinforced concrete broken.

7.The ship hull in mussels , derusting

8.Other: ice breaking, breaking the permafrost and vibrating sand.

Operating the Hydraulic rock Hammer:

* Press Chisel to the object to be broken.

* Strike vertically.

* Once object is broken, stop striking immediately.

Working in high or low outside temperatures:

High: The temperature of hydraulic oil must be ensure it close not exceed the specified temperature limits.

Low: At temperature below 0 degrees centigrade, the carrier must be warmed up prior to use, in the way described by the excavator manufacturer.

Ensure that the hydraulic oil in the carrier is at least at 0 degrees centigrade, before starting up the hydraulic hammer.

Note: The Hydraulic hammer and excavator or will not operate to full capacity unit the oil temperature has reached at least 60 degrees centigrade.

Grease:

Always observe the relevant safety regulations when handing oils and greasing.

Every two hours of continuous operation lubricate the chisel with moly-based grease.

To guarantee longer life of chisel and bushing, hydraulic hammer should take high performance grease and genuine parts which is supplied by PTEROSAUR. 

Important!

1. Engine’s rotation speed should be controlled under the one pre-set.

  2. Don’t work continuously in hot summer, to prevent too high temperature of hydraulic oil. If oil temperature reaches 80 degrees centigrade, must stop working, until the temperature lowers down.

Important!

Feeding hot hydraulic oil to extremely cold hydrauic hammer will cause internal stresses in the unit resulting in its failure.

Important!

If grease is not supplied sufficiently, then high hear is generated due to friction at the moving parts if the hammer. The heat can cause premature wear and cracking of related parts.


Company information

    Yantai Baicai Machinery Co., Ltd. Was founded in 2004, we are professional manufacturer of hydraulic breakers. Now our factory mainly produces SOOSAN and FURUKAWA system hydraulic breakers and spare parts in China.

 

    We have been specialized in R&D heavy-duty hydraulic breakers. We have already developed 210mm and 230mm diameter chisel heavy duty breakers in 2012. We also do OEM hydraulic breakers for customers, our hydraulic breakers have exported to USA, Italy, Korea, Norway, Austria, Australia, India, Indonesia, Sri Lanka, Qatar, Pakistan, Thailand, Vietnam, Peru and so on.

 

We focus on the quality and service, choosing material strictly, we adopted Korea advanced technology, Customers’ satisfaction is always our first priority.

 

We got CE certificate and ISO9001 quality management system.

 

We are in confidence that, together with customers, we can always create better future.

Contact Information:


Nina Yan

Yantai Baicai Machinery Co., Ltd.

E-mail: nina@yantaibaicai.com

Tel: +86 535 6511307

Mobile(Whatsapp): +86 185 6112 8706

Wechat: 18561128706

Website: www.yantaibaicai.com

    YANTAI BAICAI MACHINERY is one of Hydraulic Breaker MANUFACTURERS in China machinery sector. We hope and strive to bring you cost-effective purchasing enjoyment through our consistent efforts and good service. YANTAI BAICAI is not cheapest price in China,maybe we are not best quality,but we will be your right supplier. Welcome to contact us for more information.

phone number

+8618561128706

e-mail address

nina@yantaibaicai.com

location address

No. 1 ZHISHUIQIANJIE, ZHIFU DISTRICT, YANTAI

leave a message


NAME

EMAIL

PHONE

YOUR MESSAGE